The xenon arc testing machine can be used in conjunction with appropriate filters to filter out ultraviolet light, visible light or infrared light, to assess the impact of the tested product on this light source. All test results can be used to select new materials, improve existing materials, or evaluate changes in material formulations.
Complies with: GB/T16422.2, 1SO4892-2, GB/T9344, ASTMD2565, JISK7219, JISZ2381 and other tests
Verification standard
Irradiance automatic control: W/m2@340nm(420nm)(300-400nm)
Blackboard temperature (BPT) : 40-110℃ ± 2℃
Black standard temperature (BST) : 40 to 120℃±2℃
Light and dark transition time control: The cycle time can be freely set
Rainfall cycle time control: 1. Spraying 2. Spraying cycle (102 minutes /18 minutes)3. Spray cycle (60 minutes /12 minutes
Spray pressure: 1.0kgf/cm²
Spray flow rate: 2.10L/min
Safety alarm control: Automatic diagnosis and display control for low water level, supply fan overload, return machine overload, test over-temperature, humidification over-temperature, xenon lamp failure, etc
