The needle flame tester is suitable for testing the flame retardant performance of electronic components, electrical parts, mechanical components, injection molded parts and other electrical products. This machine simulates the small flames generated inside the product under fault conditions and assesses the fire hazard using simulation technology.
The needle flame tester is composed of three parts: the needle flame burner, the working chamber and the temperature measurement device.
This machine complies with test standards such as IEC60695-2-2(2004), GB5169.5-2008, and GB4706.1.
● Working voltage :AC220V, 50Hz;
● Flame application time: Adjustable (0 to 999.9 seconds);
● Burning duration :0 to 999.9 seconds, automatically recorded, can be paused at will;
● Flame height: Adjustable at 12±1mm;
Low flame temperature measurement: from 100 ℃ to + / - 5 ℃ up to 700 ℃ + 3 ℃ to 23.5 S + 1 S, temperature display: 0-1000 ℃ plus or minus 0.5 ℃;
● Gas source type: Butane (provided by the user);
● Flame application Angle: Adjustable from 0 to 45°;
● Needle height: greater than 35mm(inner diameter 0.5, outer diameter 0.9);
● Adjustable gas volume (flowmeter);
● Dimensions :1100X1150X550mm(Internal volume greater than 0.5 cubic meters)
● Thermocouple :φ0.5 armored nickel-chromium/nickel-aluminum wire,K scale, imported from the UK, insulated from ground;
It comes with one receiving tray, five sheets of silk paper and one piece of pine board
