خانه/محصولات/تجهیزات اتوماسیون صنعتی/Millivolt Voltage Tester used to measure alternating voltages of millivolts and microvolts below the millivolt level.
Millivolt Voltage Tester used to measure alternating voltages of millivolts and microvolts below the millivolt level.
millivolt voltage tester for microvolts,industrial millivolt voltage meter,low voltage AC tester
,
industrial millivolt voltage meter
,
low voltage AC tester
اطلاعات اولیه
محل منبع:چین
نام تجاری:CHENGFENG
گواهی:ISO,CE
شماره مدل:CF8893
پرداخت
جزئیات بسته بندی:کیس های چوبی
زمان تحویل:10 روز کاری
شرایط پرداخت:T/T، نقدی، L/C، D/A، D/P، Western Union، MoneyGram
قابلیت ارائه:5 واحد در ماه
گالری
Millivolt Voltage Tester used to measure alternating voltages of millivolts and microvolts below the millivolt level.
توضیحات محصول
Instruction for the Use of Millivoltmeter
1. Plug it into a 220v socket.
2. Press the power switch at the back to turn on the machine.
3. Connect the signal to be measured to the back, the red and black terminal blocks (red +, black 1).
4. Press the start button to begin the measurement. The instrument will display the voltage value, with the unit being (mv).
5. Press the "Reset" button to stop the measurement, and the instrument reading will be zero.
6. If the measurement signal exceeds the set threshold value, the alarm light will come on. Pressing the "Reset" button can clear the alarm.
7. Alarm threshold voltage setting method: Press the button at the bottom of the meter for more than 3 seconds. The display will change to HidL. Release the button and press it briefly again
Press the key to switch to input to change the date value, then press the key to end the setting. Press the long key to exit the setting.