Floor Covering Material Radiant Heat Flux Test Device,Complies with GB Factory 11785

I. Scope of Application
It is suitable for testing floor materials that are placed horizontally and exposed to an inclined thermal radiation field with a small flame.
It is suitable for all kinds of flooring materials. Such as: textile carpets, cork boards, wood boards, rubber boards, plastic flooring and floor spraying materials. This device can reflect the combustion performance of the floor covering material, including the base material used. Changes in the backing material, base material or other aspects of the floor covering material may affect the test results. It is used to test and describe the combustion characteristics of the floor covering material in response to fire and heat under laboratory control conditions.
Ii. Standards
Complies with GB Factory 11785 "Determination of Fire Performance of Paving Materials - Radiant Heat Source Method". The structure of this machine consists of two parts: the combustion box and the control box
It is composed of several parts.
Iii. Technical Parameters
Measurement range of the heat flux meter: (0-15) Kw/m'
Accuracy of the heat flux meter: ±0.2Kw/m';
Heat flux meter accuracy: <±3%;
The measurement range of the thermal radiation high-temperature meter is 400-600℃
Accuracy: ±0.5℃;
Blackbody temperature error: ±5℃
Smoke exhaust velocity: (2.5±0.2)m/s
Smoke exhaust capacity: (39-85)m/min
The size of the porous refractory material radiation plate is 300mm×450mm, and it can withstand a high temperature of approximately 900℃.
Thermocouple: K-type stainless steel armored thermocouple with a diameter of 3.2mm;
Heat flux distribution requirements: At 200mm: (9.1±0.4)KW/m; At 400mm: (5.0±0.4)KW/m²; At 600mm: (2.4±0.2)KW/m; Combustion gas: Propane. (Provided by the customer); Combustion gas flow rate: (0.026±0.002)L/S; Combustion burner: Outer diameter ·10mm, inner diameter 6mm, 35 Φ0.7mm holes are drilled on the burner tube; Flame height: Adjustable from 60 to 120mm; Ignition system: High-voltage electronic ignition;
The fan system expels the exhaust gas outdoors.
Powerful exhaust system: This machine is equipped with a powerful exhaust fan. After the test is completed, start the exhaust
Combustion chamber dimensions: L1420*W1200*H2300 (mm)
Material of control box/combustion box: Made of high-quality (t=1.2mm)304 stainless steel plate, processed by CNC machine tools, with an elegant and generous arc shape.
Blowtorch: Self-made by our company, made of 304 stainless steel, fully complies with the requirements of the GB/T11785 standard.
Other mechanical parts are made of 304 stainless steel or A3 material with thickened electroplating, which is anti-corrosion and anti-rust.