UV Ultraviolet Accelerated Aging Chamber Using Fluorescent Ultraviolet Lamps To The UV Spectrum In Sunlight And Them With Temperature Control Devices

I. Overview of UV Ultraviolet Aging Chamber
By using fluorescent ultraviolet lamps similar to the UV spectrum in sunlight and combining them with temperature control devices, factors such as high temperature, high humidity, condensation, and dark rain cycles in the UV segment of sunlight that cause damage to materials, such as discoloration, reduced brightness and strength, cracking, peeling, powdering, and oxidation, are analodized. At the same time, through the synergistic effect between ultraviolet light and moisture, the single light resistance or single moisture resistance of the material is weakened or fails, thus being widely used in the evaluation of the material's weather resistance performance. The equipment provides the best sunlight UV simulation, has low usage and maintenance costs, is easy to use, adopts automatic control operation, has a high degree of automation in the test cycle, and has good light stability. It features a high reproducibility rate of test results.
Ii. Structural Materials:
1. Inner box dimensions: W1170×H500×D450 (Non-standard sizes can be customized)
2. Dimensions: W1480×H1300×D550 (Customized non-standard sizes available)
3. Body material: SUS304# stainless steel plate.
4. Sample holder: Aluminum alloy frame-type base frame sight plate
5. Control Instrument: RKC intelligent control instrument
6. Irradiation lamp tubes: 4 UVA-340 tubes
7. The power supply leakage circuit breaker controls the overload and short circuit alarm, over-temperature alarm and water shortage protection of the circuit

Iii. Technical Parameters of UV Ultraviolet Aging Chamber
Temperature range: RT room temperature to 70℃
2. Temperature uniformity: ±1℃
3. Temperature fluctuation: ±0.5℃
Humidity range: 20-98%RH, temperature deviation: ±3.0%RH (>75%RH), ±5.0%RH (≤75%RH)
4. Center distance inside the lamp tube: 70mm
5. The center distance between the test sample and the lamp tube: 254mm±3mm
6. Irradiance: Adjustable within 1.0W/m ²
7. Light exposure and condensation can be controlled separately
8. Lamp tubes: L=1200/40W, 4 pieces (UVA/UVB service life over 1600 hours)
9. Controller: RKC Intelligent controller.
10. Temperature control mode: PID self-tuning SSR control
11. Standard specimen size: 76.2X50.8mm (Larger specimens are also acceptable)
12. Effective irradiation area: 900X210mm
14. Ultraviolet wavelength: The UVA range is 315 to 400nm.
15. Test time: 0-9999 hours (adjustable)
16. Irradiated black panel temperature: Room temperature to 70℃
17. Standard Sample holder: The sample holder can adjust the distance between the sample and the lamp tube

Iv. Structural Description
The box body is made by CNC equipment, featuring advanced technology, smooth lines and a beautiful and elegant appearance
2. The box body is made of 1.2mm thick SUS304 high-grade stainless steel
3. The air duct inside the box adopts a single circulation system and is equipped with an imported axial flow fan, which enhances the air flow brightness and heating capacity, and significantly improves the temperature uniformity within the test chamber
4. Lamp tubes: Special ultraviolet lamp tubes, 4 in a single row, 40W each
5. Lamp tube lifespan: Over 1,600 hours
A total of 4 UVA ultraviolet lamps were installed on the top of the studio
7. The lamp tube has a quick interface. It can be quickly disassembled and assembled for convenient replacement
8. The heating method is circulating air heating with heating tubes, which features rapid temperature rise and uniform temperature distribution
9. The box lid is of a bidirectional flip type and can be closed easily and freely
10. It is equipped with an over-temperature protection device inside and will automatically stop heating when the temperature exceeds the limit
11. The sample holder is made of stainless steel
12. The surface of the test sample is parallel to the plane of the ultraviolet lamp

V. Safety Protection Devices for UV Ultraviolet Aging Chamber
1. Grounding protection
2. Power overload short-circuit breaker
3. Control circuit overload and short-circuit fuses
4. Over-temperature protection