| Highlight | GW601 glow wire tester,IEC 60695-2-11 flammability tester,safety protection testing equipment |
|---|
| Test Standard | IEC 60695-2-11 |
|---|---|
| Heating Element | Ni80/Cr20 Alloy Wire |
| Temperature Range | Ambient To 1000°C |
| Heating Rate | 0-1000°C Within 1 Minute |
| Test Force | 1.0N ± 0.2N |
| Test Standard | IEC 60332-1 / UL 1581 |
|---|---|
| Burner Type | Tirrill Burner, 500W |
| Flame Height | 125mm ± 5mm (inner Blue Cone 40mm) |
| Gas Supply | Methane Or Natural Gas 99% Purity |
| Specimen Type | Single Wire/cable Ø>8mm |
| Test Standard | IEC 60695-2-11 |
|---|---|
| Heating Element | Ni80/Cr20 Alloy Wire |
| Temperature Range | Ambient To 1000°C |
| Heating Rate | 0-1000°C Within 1 Minute |
| Test Force | 1.0N ± 0.2N |
| Environmental Temperature | Operating From 10 ℃ To 35 ℃ |
|---|---|
| Natural Gas Supply | The Gas Supply Standard Specified In The Standard Is The Standard Test Gas G112, As Specified In BS 4947 |
| Gas Flow Rate | The Gas Flow Rate Of The Burner Can Be Adjusted From 0 To 5 N/minute |
| Voltage | 230V, 10A |
| Pressure | 1 Kpa |
| Test Standard | UL 94 / IEC 60695-11-10 |
|---|---|
| Burner Type | Bunsen Burner, 50W/500W Selectable |
| Flame Height | 20mm ± 1mm (50W) / 125mm ± 5mm (500W) |
| Gas Supply | Methane 99.9% Purity Or Equivalent |
| Chamber Volume | ≥ 0.75m³ |
| Test Standard | GB/T 5455 / ISO 6940 |
|---|---|
| Burner Type | Bunsen Burner, 45mm Flame |
| Flame Height | 40mm ± 2mm |
| Gas Supply | Propane Or Butane Industrial Grade |
| Specimen Size | 300mm X 80mm |
| Test Standard | GB/T 8627 / ASTM E662 |
|---|---|
| Light Source | White Incandescent Lamp, 6.5V |
| Photometric System | Photomultiplier Tube Detector |
| Test Mode | Flaming And Non-flaming Modes |
| Chamber Material | Stainless Steel 304 |
| Test Standard | ISO 11925-2 / EN 13501-1 |
|---|---|
| Burner Type | Gas Burner With Flame Adjustment |
| Flame Height | 20mm Adjustable |
| Specimen Size | 250mm X 90mm (standard) |
| Air Velocity | 0.7m/s At Flue |
| Test Standard | IEC 60695-2-11 |
|---|---|
| Heating Element | Ni80/Cr20 Alloy Wire |
| Temperature Range | Ambient To 1000°C |
| Heating Rate | 0-1000°C Within 1 Minute |
| Test Force | 1.0N ± 0.2N |