| High-temperature Bath Temperature Range | RT To 250℃ |
|---|---|
| The Humidity Range Of The Low-temperature Bath Is | -50℃ To RT |
| Impact Temperature Of The Test Chamber | High Temperature 50-200 |
| Low Temperature | -10℃ To -40℃ |
| Heating Time | RT-250 ℃ For 60 Minutes |
| Temperature Range | RT+10℃ To 50℃ |
|---|---|
| Humidity Range | >95%RH (Actual Humidity Value In The Working Chamber) |
| Temperature Uniformity | ≤2℃ |
| Temperature Fluctuation | ±0.5℃ |
| Gas Generation Method | Cylinder Method |
| Temperature Range | RT Room Temperature To 70℃ |
|---|---|
| Temperature Uniformity | ±1℃ |
| Temperature Fluctuation | ±0.5℃ |
| Humidity Range | 20-98%RH |
| Temperature Deviation | ±3.0%RH (>75%RH), ±5.0%RH (≤75%RH) |
| The Voltage Used By The Equipment Is | AC 220V±10% |
|---|---|
| Frequency | 50Hz±5% |
| Swing Pipe Size | R=1200mm, |
| Swing Pipe Material | SUS304 Stainless Steel (outer Diameter ≥19mm, Wall Thickness ≥2mm) |
| Total Water Flow Rate | IPX3:3.5L/min; IPX4:5.3 L/min |
| Frequency | 50Hz+/-3%. |
|---|---|
| The Input Power Supply For Work Is | 220V+/-10%AC |
| The Control Accuracy Is | Better Than ±1°C |
| The Required Temperature Range Is | From 10°C To 80°C |
| The Accuracy Of The High-voltage Transformer | Should Be ±1%. |
| Temperature Adjustment Range | RT+5℃ To 60℃ |
|---|---|
| Standard Wire Diameter Of Metal Mesh | 50 μ M |
| Wind Speed | ≥7.5/s |
| . Standard Wire Diameter Of The Test Chamber Screen | 75 To 100 μ M |
| Dust Consumption | 2kg To 4kg Per 3 |
| Temperature Range | -60℃ To 150℃ |
|---|---|
| Temperature Fluctuation | 0.5℃ |
| Temperature Deviation | ≤2℃ |
| Heating Time | Approximately 40 Minutes To Rise From Room Temperature To 150℃ (no-load Non-linear) |
| Cooling Time | It Takes Approximately 60 Minutes To Cool From Room Temperature To -60℃ (no-load Non-linear) |
| Inside Dimensions | W500 * H500 * D400mm |
|---|---|
| Dimensions | W780 * H1600 * D1450mm (Based On Actual Delivery Dimensions) |
| Power Supply Requirements | AC220V±10%V,50±1Hz,Single Phase Three Wire |
| Maximum Installed Power | 4KW、5.5KW |
| Temperature Range | RT (room Temperature+15 ℃)~+150 ℃ (without Compressor)、 -40 ℃ To+150 ℃ |
| Ambient Temperature | Room Temperature To 40℃ |
|---|---|
| Relative Humidity | ≤75%. |
| . Working Environment | Indoor Without Forced Ventilation. |
| Power Supply Voltage | AC220V±10V, 50HZ. |
| Combustion Gas Source | Combustion Gas Source: Natural Gas, Liquefied Petroleum Gas. |
| Inner Box Size | W1170 × H500 × D450 (can Be Customized ) |
|---|---|
| External Dimensions | W1480 × H1300 × D550(can Be Customized ) |
| Body Material | SUS304 # Stainless Steel Plate |
| Sample Holder | Aluminum Alloy Frame Type Base Frame Visual Panel |
| Controller | RKC Intelligent Controller |