| Test Voltage | 10/25/50 V / 100/250/500/1000 |
|---|---|
| Resistance Measurement | 0-10^17 Ω |
| Resolution | 100 |
| Microcurrent Measurement | 0.1fA (10^-16 A) -199.9 µA |
| Packaging Details | Wooden cases |
| Box Temperature | RT+10 To 50°C |
|---|---|
| Relative Humidity Inside The Box | 45%~75%RH |
| Nominal Wire Diameter Of The Net | 50 μ M |
| Nominal Spacing Between Lines; | No More Than 70 μ M |
| The Dust Content Inside The Box Is | 2Kg/m ³ |
| The Number Of Test Samples Is | 5 Pieces (pcs) |
|---|---|
| The Telescopic Spacing Is | 300 To 1800mm |
| The Expansion And Contraction Speed Is | 10 To 30 C.P. |
| Air Pressure Source | 7kg/cm² |
| Power Supply | 1∮AC 220V 2A |
| Input Voltage | AC220V+10%, 50Hz |
|---|---|
| Voltage Drop Range | 0 To 20mV |
| Working Current | Adjustable From 0 To 40A At Wil |
| Voltmeter Accuracy | +1%+3 Characters |
| Ammeter Accuracy | +1%+3 Digits |
| Temperature Range | Room Temperature To 250℃. |
|---|---|
| Timer | 0 To 99.99 Seconds. |
| Heater Power | 1.25KW |
| PH Test Paper | 1 To 7PH |
| Temperature Resolution | : 0.1℃ |
| Dc Power Supply | Adjustable Voltage From 0 To 5000V |
|---|---|
| Ammeter | 0-20mA |
| Current Electrode | 20mmx70mm |
| Voltage Electrode | Φ1.0mm |
| Electric Anode Measurement Range | 0~10°2 |
| Time | 0 To 999 Hours Can Be Set Arbitrarily |
|---|---|
| Temperature ControllerTemperature Controller | With PID Setting |
| Temperature Fluctuation | ±0.5℃ |
| Temperature Uniformity | ±2.5℃ |
| Temperature Range | Room Temperature To 200℃ Or Room |
| Temperature Uniformity | ±2.5℃ |
|---|---|
| The Timer Error Shall Not Exceed | 1 Second /h |
| Flame Height | Adjustable From 20mm±2mm To 175mm±1mm |
| Ignition Time | Adjustable From 0 To 999.9s±0.1s |
| Burning Duration | 0-999.9s±0.1s, Automatically Recorded, Manually Paused |
| The Swing Angle Is | Adjustable At 45°, 60° And 90° Left And Right |
|---|---|
| The Swing Speed Is | Adjustable From 10 To 60 Times Per Minute |
| Automatic Counters | 6, Counting Separately |
| Six Loads Of | 10N And Six Loads Of 5N |
| The Load Current Is | 0.5 To 25A |
| The Radius Of The Sample Bending Fixture | R150±10mm, 200±10mm, And R250±10mm |
|---|---|
| Test Speed | Adjustable From 0.1 To 1m/s |
| Sample Length | For Type 05, Samples Can Be Made In Lengths Of 2M, 3M, 4M And 5M |
| Counter | Continuously Set From 1 To 999999 |
| Maximum Stroke | 800MM |