Equipment parameters:
Type Single-sided water curtain type
Internal dimensions of the device W1500XD1200XH1800mm(height including pool)
Equipment dimensions (approx.) W1500XD1400XH2250mm (height excluding fan)
Pool plates The national standard 1.2mm cold-rolled steel plate is hydraulic welded, and the height of the pool is about: 300mm
Side panels The national standard 1.2mm cold-rolled steel plate is hydraulicly formed, and the height of the side plate is about: 2400mm
Roof National standard 1.2mm cold-rolled steel plate hydraulic forming
Water slab board It is made of 201# 1.0mm stainless steel plate hydraulic combination
The distance between the water curtain and the cabinet opening Maximum size: 400mm
Bottom 1.5X50X50 iron square through welding reinforcement.
Chassis mounting M12X100 adjustment cup, adjust the level
Filtered water tank National standard 1.5mm cold-rolled steel plate hydraulic welded 400*300MM equipped with a filter screen
Junctions The connecting plate is connected with the plate by screws
Paint mist trapping type Spray wash
Circulating pipes Iron) Pipe diameter 63MM 2 inches
Fans 1 set of 3P 380V Lixin fan × (Kyushu)
Pump 1 set of 3P 380V 50Hz water pump
Explosion-proof fluorescent lamps 40W ×1 set (double tube)
Control electric box One set (CHINT)
Power supply 3 phase 4 wires
Purpose and working principle:
Environmentally-friendly water curtain cabinet (painting table) is mainly used for painting assembly line workshops in all walks of life as environmental protection equipment for painting waste gas treatment. Its working principle is that the self-priming pump circulates and pumps water to the water curtain plate to flow down evenly, and the exhaust gas (lacquer) sprayed by the spray gun is hit by the water on the water curtain board to the water discharge below. In addition, a small part of the exhaust gas (lacquer) is discharged from the outside of the workshop by the fan above through the exhaust duct. So that there is no exhaust gas (lacquer) in the workshop, to give everyone a good working environment. The characteristic is that the remaining paint powder can be directly hit in the pool or water curtain during painting, and the odor generated during painting and a small amount of unadsorbed paint powder are filtered through the multi-layer water curtain and discharged to the outside of the paint spraying room through the exhaust fan, so as to purify the painting working environment and protect human health, and can enhance the finish of the painted workpiece
Our advantages:
1. Professional technical support.
2. Rich experience in loading a large number of containers in Chinese seaports.
3. Fast shipping by well-known shipping company.
4. Best service with email after shipment.
5. We are a professional testing equipment manufacturer in China, with rich experience and skills, and also with the best quality products.
6. Timely after-sales service
After-sales service :
1. We guarantee that the goods fully comply with the quality, specifications and performance requirements stipulated in the contract;
2. Before delivery, we will conduct accurate and comprehensive testing of the products; Packing according to your requirements, pictures are attached before shipment for your confirmation, delivery is made on schedule, and professional shipping documents are provided;
3. We will provide you with quality service immediately, reply within 48 hours after receiving the quality message, and provide appropriate solutions within 3 working days;
4. After acceptance, our engineers will provide professional and technical services free of charge, such as video guidance and teaching, and on-site guidance and teaching if necessary;
5. We provide a 12-month warranty period, and in the event of quality problems during the product warranty period (not caused by human factors), we guarantee to provide free repair, maintenance and replacement of damaged and defective parts services;
In the event of any technical failure outside the warranty period, we will provide free telephone consultation services, and can also carry out paid repair and maintenance services;