| Measurement Range | 0-180 Degrees |
|---|---|
| Resolution Accuracy | ±0.10 |
| Test Method | Seat Drop Method |
| Analysis Methods | Manual Horizontal |
| Liquid Accuracy | 0.01 μ L |
| Voltage Range | AC (380±38) V |
|---|---|
| Relative Humidity | ≤85%RH |
| Temperature | 5℃ To +28℃[1] (Average Temperature Within 24 Hours ≤28℃) |
| Working Power Supply | 380V, 2KW |
| Power Supply Conditions | Three-phase Four-wire + Protective Ground Wire |
| Simultaneous Drops Of Mobile Phones | 2 Units |
|---|---|
| Allowable Specimen Weight | 2kg(maximum) |
| Drop Height | 60-200mm |
| Test Speed Range | 6 To 20 Times Per Minute |
| Air Source | ≥0.5Mpa |
| Simultaneous Drops Of Mobile Phones | 2 Units |
|---|---|
| Allowable Specimen Weight | 2kg(maximum) |
| Drop Height | 60-200mm |
| Test Speed Range | 6 To 20 Times Per Minute |
| Air Source | ≥0.5Mpa |
| Temperature Range | -40 To 150℃ |
|---|---|
| Temperature Control Stability | 0.5℃ |
| Temperature Deviation | 2.0℃ |
| Temperature Change Rate | Average 1.5℃/min (-40 To +150℃) |
| Humidity Range | 20% To 98%RH |
| Power Supply Voltage | AC220V±10%, 50HZ |
|---|---|
| . Printing | The Micro Printer Automatically Prints The Output |
| Temperature Recovery Time | Less Than 4 Minutes |
| Material Cutting Method | It Can Be Manually Or Automatically Cut |
| Display Resolution | 0.1℃ |
| Temperature Control Range | 6℃ Above Room Temperature -400℃ |
|---|---|
| Temperature Control Accuracy | ± 0.01℃ |
| Temperature Control Channels | 5 Channels (expandable To 6 Channels) |
| Programmed Rise Rate | 0.1℃-50℃/min |
| Time Setting | 0-9999.9/min |
| Dropped Mobile Phones | 2 Units |
|---|---|
| Allowable Specimen Weight | 2kg(maximum) |
| Drop Height | 60-150mm |
| Test Speed Range | 6 To 20 Times Per Minute |
| PLC Controller And Touch Screen | 1 Set |
| Power Supply | 220V |
|---|---|
| Test Speed | 1-10 Times Per Minute, Manually Adjustable |
| Control Mode | Touch Screen Setting Input Direct Action, Simple And Convenient Operation |
| Test Station | It Can Test 2 Samples Simultaneously, With 4 Buttons For Each Sample |
| Weight | Approximately 60kg |
| The Moving Range Is | 2 To 50mm Or Negotiable |
|---|---|
| Test Speed | 3 To 180rpm/min |
| Load-bearing Ramps (g) | 10,20,50,100,200,500 G |
| Voltage | 220V |
| Load Weights | 10,20,50,100,200,500 G (customizable According To Customer Requirements) |