| Test Power Supply Power | 2100W |
|---|---|
| Test Voltage | 100V-600V Can Be Set |
| The Force Applied By The Electrode To The Surface Of The Sample Is | 1.0N±0.5 |
| Electrode Distance | 4.0mm±0.1 |
| The Height Of The Droplet | 30 To 40mm |
| Maximum Working Pressure | 2.5Mpa |
|---|---|
| Safe Burst Pressure | 2.7 To 3Mpa |
| Heater Power | 2300W |
| Temperature Self-control Range | Room Temperature To 200℃ |
| Temperature Deviation | ±0.5℃ |
| Maximum Working Pressure | 2.5Mpa |
|---|---|
| Safe Burst Pressure | 2.7 To 3Mpa |
| Heater Power | 2300W |
| Temperature Self-control Range | Room Temperature To 200℃ |
| Volume | 4000 Cm ³ |
| Maximum Test Load | 100kg |
|---|---|
| Amplitude Range | 25.4mm (1 Inch) |
| Simulated Vehicle Speed | 25 To 40km/h |
| Machine Weight | 200 |
| Frequency Range | 150 To 300rpm(revolutions Per Minute |
| Measurement Range | (0-15) Kw/m' |
|---|---|
| Accuracy | <±3% |
| Range | 400-600℃ |
| Blackbody Temperature Error | ±5℃ |
| Smoke Exhaust Velocity | (2.5±0.2)m/s; |
| Gas Source | Propane Gas With A Purity Of ≥95% |
|---|---|
| Photoelectric System | The Light Source Is A Bulb. |
| Power | 15W, Voltage: 6V |
| Burning Lamp | Bunsen Burner |
| Smoke Density Measurement Range | 0 To 100% |
| Accuracy Of Smoke Density Measurement | ±3% |
|---|---|
| Receiving Lens Focal Length | 60-65mm |
| Main Burner Working Pressure | 276KPa (adjustable) |
| Auxiliary Burner Pressure | 138KPa (adjustable) |
| Power Supply Voltage | AC220V±10%, 50Hz |
| Measurement Range Of The Heat Flux Meter | (0-15) Kw/m' |
|---|---|
| Accuracy Of The Heat Flux Meter | ±0.2Kw/m' |
| Heat Flux Meter Accuracy | <±3% |
| Accuracy | ±0.5℃ |
| Blackbody Temperature Error | ±5℃ |
| Ambient Temperature | Room Temperature To 40℃ |
|---|---|
| Relative Humidity | ≤75% |
| Working Voltage | AC 220V±10V, 50Hz |
| Heating Power | 1000W |
| Measurement Range | Room Temperature To 900℃ |
| Surface Force | 1.0 ± 0.05N |
|---|---|
| Test Voltage | 100-600V |
| Maximum Test Current | 3A |
| Distance Between Two Electrodes | 4.0mm |
| Dropping Device | Dropping Time Interval Can Be Set Arbitrarily |