products
Home /Products/

environmental test equipment

All Products
I'm Online Chat Now
Contact Person : Mia Feng
Phone Number : +86-13128029450
WhatsAPP : +8613128029450
Keywords [ environmental test equipment ] match 143 Products.
1KN Tensile Testing Machine For Determining The Quality Of Products

1KN Tensile Testing Machine For Determining The Quality Of Products

Price: US$2000-$30000 MOQ: 1 Set
Model Number CF8711
Unit Switching Kg,lb,N
Data Sampling Frequency 200times/sec
Effective Test Width 150mm
Effective Stretching Space 650mm/800mm/1000mm
Sulfur Dioxide Test Chamber Reference Standard: GB/T9789-2008 Test For Sulfur Dioxide Corrosion Of Organic Coatings On Metals And Other Non-Metals Under Normal Condensation Conditions

Sulfur Dioxide Test Chamber Reference Standard: GB/T9789-2008 Test For Sulfur Dioxide Corrosion Of Organic Coatings On Metals And Other Non-Metals Under Normal Condensation Conditions

Price: US$2000-$30000 MOQ: 1 Set
Temperature Range RT+10℃ To 50℃
Humidity Range >95%RH (Actual Humidity Value In The Working Chamber)
Temperature Uniformity ≤2℃
Temperature Fluctuation ±0.5℃
Gas Generation Method Cylinder Method
CF8321 Rain Test Chamber Applicable To Communication Products And Automotive Parts

CF8321 Rain Test Chamber Applicable To Communication Products And Automotive Parts

Price: US$2000-$30000 MOQ: 1 Set
Working Dimensions 600*600*600 W*H*D (mm)
The Outer Box Dimensions Are Approximately 1450*1650*1200mm
The Diameter Of The Water Spray Ring 400mm
The Pipe Diameter φ16mm
The Diameter Of The Spray Hole φ 0.8mm
High And Low Temperature (Humidity And Heat) Test Chamber

High And Low Temperature (Humidity And Heat) Test Chamber

Price: US$2000-$30000 MOQ: 1 Set
Inside Dimensions W500 * H500 * D400mm
Dimensions W780 * H1600 * D1450mm (Based On Actual Delivery Dimensions)
Power Supply Requirements AC220V±10%V，50±1Hz，Single Phase Three Wire
Maximum Installed Power 4KW、5.5KW
Temperature Range RT (room Temperature+15 ℃)~+150 ℃ (without Compressor)、 -40 ℃ To+150 ℃
Single Combustion Testing Machine For Building Materials Or Products A Method Used To Determine The Fire Response Performance Of Building Materials Or Products

Single Combustion Testing Machine For Building Materials Or Products A Method Used To Determine The Fire Response Performance Of Building Materials Or Products

Price: US$2000-$30000 MOQ: 1 Set
Signal Output 4-20mA
Response Time T90 ≤2 Seconds
Ambient Temperature 0-45℃
Relative Humidity <90% (no Condensation)
Linearity <± 0.1%O2
Configuration List Of GC900C Chromatograph It Is Widely Applied In Multiple Fields Such As Petroleum, Chemical Engineering, Pesticides, Environmental Protection

Configuration List Of GC900C Chromatograph It Is Widely Applied In Multiple Fields Such As Petroleum, Chemical Engineering, Pesticides, Environmental Protection

Price: US$2000-$30000 MOQ: 1 Set
Temperature Control Range 6℃ Above Room Temperature -400℃
Temperature Control Accuracy ± 0.01℃
Temperature Control Channels 5 Channels (expandable To 6 Channels)
Programmed Rise Rate 0.1℃-50℃/min
Time Setting 0-9999.9/min
High and low temperature tensile testing machine is mainly applicable to the testing of mechanical properties such as tensile, compressive, bending, peeling, tearing

High and low temperature tensile testing machine is mainly applicable to the testing of mechanical properties such as tensile, compressive, bending, peeling, tearing

Price: US$2000-$30000 MOQ: 1 Set
Load Decomposition Degree 1/100,000
Load Accuracy ≤0.5%
Test Speed 0.1-500mm/min (can Be Set Arbitrarily On The Computer)
Test Stroke 400, 500 (can Be Increased As Per Customer Requirements)
Test Width 40cm(can Be Widened As Per Customer Requirements)
Ozone Resistance Test Device Conforming To IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20) : 1994, ISO 1431-1/1994 And ASTM 4575.

Ozone Resistance Test Device Conforming To IS 10810 (Part 13), IEC 60811-403, ASTM D 470, IS 3400 (Part 20) : 1994, ISO 1431-1/1994 And ASTM 4575.

Price: US$2000-$30000 MOQ: 1 Set
Frequency 50Hz+/-3%.
The Input Power Supply For Work Is 220V+/-10%AC
The Control Accuracy Is Better Than ±1°C
The Required Temperature Range Is From 10°C To 80°C
The Accuracy Of The High-voltage Transformer Should Be ±1%.
Sand And Dust Test Chamber Scheme Is Mainly Used To Assess Whether The Enclosures And Seals Of Electronic And Electrical Products Can Ensure The Good Condition Of The Equipment

Sand And Dust Test Chamber Scheme Is Mainly Used To Assess Whether The Enclosures And Seals Of Electronic And Electrical Products Can Ensure The Good Condition Of The Equipment

Price: US$2000-$30000 MOQ: 1 Set
Box Temperature RT+10 To 50°C
Relative Humidity Inside The Box 45%~75%RH
Nominal Wire Diameter Of The Net 50 μ M
Nominal Spacing Between Lines; No More Than 70 μ M
The Dust Content Inside The Box Is 2Kg/m ³
The Sand And Dust Test Chamber Is Suitable For Dust-Proof And Dust Resistance Tests On Various Automotive Parts And Electronic Appliances.

The Sand And Dust Test Chamber Is Suitable For Dust-Proof And Dust Resistance Tests On Various Automotive Parts And Electronic Appliances.

Price: US$2000-$30000 MOQ: 1 Set
Temperature Adjustment Range RT+5℃ To 60℃
Standard Wire Diameter Of Metal Mesh 50 μ M
Wind Speed ≥7.5/s
. Standard Wire Diameter Of The Test Chamber Screen 75 To 100 μ M
Dust Consumption 2kg To 4kg Per 3
< Previous 4 5 6 7 8 Next > Last Total 15 page
Get In Touch
No.168 Zhen'an West Road Changlian Industry Mansion Xiabian Community Dongguan China
daxian05@jiance.17
+86-13128029450
About
Company Profile Factory Tour Quality Control Contact Us
Products
Rubber Testing EquipmentPlastic Testing EquipmentFire Resistance Tester All Categories
Mail Us
Let us know your requirement. We will connect best products with you.
Sitemap │ Mobile Site │ Privacy Policy
China Good Quality Rubber Testing Equipment Supplier. © 2025 - 2026 Dongguan Chengfeng Testing Equipment Co., Ltd. All Rights Reserved.